What Do I Need To Put Quick Release Sterring Wheel On 69 Austin Healey Sprite


In order to install a quick release steering wheel on a 1969 Austin Healey Sprite, you will need a few tools and supplies. You will need a quick release steering wheel kit, a drill, a drill bit, a hacksaw, and a few other tools. The first step is to remove the old steering wheel.

To do this, you will need to remove the center cap and the horn button. Then, you will need to drill out the rivets that hold the steering wheel to the steering column. Once the rivets are removed, the steering wheel should come off easily.

what do i need to put quick release sterring wheel on 69 austin healey sprite


Can you make Bugeye Sprite steering wheel removable?

You can make Bugeye Sprite steering wheel removable if you have the right tools and know-how. The process is not difficult, but it does require some patience and attention to detail. Here are the steps you’ll need to take:

1. Remove the center cap from the steering wheel. This will expose the bolts that hold the steering wheel to the shaft. 2. Use a wrench to loosen the bolts, but do not remove them completely.

3. Carefully pull the steering wheel off the shaft. It may be helpful to wiggle it a bit as you pull. 4. Once the steering wheel is off, you’ll be able to see the inner workings of the mechanism.

There will be a retaining ring holding the shaft in place. 5. Use a pair of pliers to remove the retaining ring. 6. Pull the shaft out of the steering wheel.

How fast does an Austin Healey Sprite go?

Assuming you are referring to the Austin Healey Sprite MkI, it had a top speed of around 87mph. The 0-60mph time was around 15 seconds. The Austin Healey Sprite was first introduced in 1958 and was in production until 1961.

It was a small, lightweight sports car that was very popular at the time. The MkI was powered by a 948cc engine that produced around 43bhp. Despite its small size and relatively low power output, the Sprite was still a fun car to drive.

It was nimble and handled well, and was perfect for a sunny day out on the open road. The top speed wasn’t particularly fast by today’s standards, but it would have been respectable in the 1950s. If you’re looking for a classic Austin Healey that’s fun to drive and won’t break the bank, then the Sprite MkI is definitely worth considering.


In order to install a quick release steering wheel on a 69 Austin Healey Sprite, you will need the following items: a quick release steering wheel, a quick release hub, a steering wheel adapter, and a set of longer bolts. You will also need a drill and a set of drill bits.

About the Author Mike Chua

Vircet is your one-stop modern products website that offers you detailed reviews based on efficiency, capacity, design, and performance. We help you make better decisions.

Leave a Comment: